industrial filter bags/dust filter bags' manufacturers/supplier-Shanghai Indro
News Category
Dust collector filter bag materials selection-Part 1

Dust collector filter bag materials selection-Part 1

Solutions of dust collector baghouse filter bag material selection: for the dust with wettability, deliquescence, in the filter media/material selection, should pay attention to the smooth, not brushed and hydrophobicity, the ptfe laminated filter fabric
2017-11-12
Reason of galvanizing of dust collector filter bag cages

Reason of galvanizing of dust collector filter bag cages

The galvanizing layer is firm, abrasive resistant, corrosive resistant, this can prevent dust collector cages getting rust and sticking with filter bags after using for some time. Galvanizing also make replacement of filter bags more smoothly, reduce the
2017-11-10
How to confirm the dust collector baghouse filter bags size?

How to confirm the dust collector baghouse filter bags size?

How to confirm the dust collector baghouse filter bags size?
The length of the dust collector filter bags determines the process requirements, ash cleaning efficiency and design parameters. The bag diameter is related to the scale width of filter media,
2017-11-09
Dust cleaning method of dust collector baghouse filter bags

Dust cleaning method of dust collector baghouse filter bags

Dust cleaning method of dust collector baghouse filter bags include: gas/air cleaning dust, mechanical shaking dust cleaning and artificial beat dust cleaning.
2017-11-09
What is working principle of venture of dust collector baghouse filter bag cages?

What is working principle of venture of dust collector baghouse filter bag cages?

Venture/venture working principle: when cleaning dust of dust collector filter bags, high speed air flow goes through the venture which leading third time air flow into dust collector filter bags, and the air flow is 5-8times of injected compressed air, t
2017-11-08
How to identify the unqualified dust collector baghouse filter bag cages?

How to identify the unqualified dust collector baghouse filter bag cages?

How to identify the unqualified dust collector baghouse filter bag cages?
From wire thickness, welding process and outlook, vertical wires and support ring number, surface treatment and other.
2017-11-07
Standard of filter bag cages for bag filter dust collector baghouse

Standard of filter bag cages for bag filter dust collector baghouse

Standards of filter bag cages for bag filter dust collector baghouse include:diameter tolerance, perimeter tolerance, length tolerance, surface outlook, welding requirement and other.
2017-11-07
Parameters and specifications of round dust collector filter bag cages

Parameters and specifications of round dust collector filter bag cages

Round filter cages usage number is the largest, and its production is most common. Its specification and parameters include: diameter, length, vertical wire number and thickness, venturi, material, finish treatment.
2017-11-06
Common specification-diameter and length of round dust collector filter bag cages

Common specification-diameter and length of round dust collector filter bag cages

Round dust collector filter bags cages specification: diameters 115mm, 125mm, 147mm, 156mm, 195mm and others. Filter cages lengths include: 2000mm, 2400mm, 2800mm, 3200mm, 3600mm, 4000mm, 4400mm, 4800mm, 5200mm, 5600mm, 6000mm and other.  The fitted filte
2017-11-04
Surface finish treatment and packages of epoxy/silicone coated dust collector filter bags cages

Surface finish treatment and packages of epoxy/silicone coated dust collector filter bags cages

Generally, chemical treatment is used to clean the oil, rust, oxide skin and other debris on the surface of the bag cage. We use a long plastic bag to pack the dust collector filter bag cages and seal the mouth of the plastic bag. At the same time, the sp
2017-11-03