PPS (polyphenylene sulfide) series filter materials products
News Category

PPS (polyphenylene sulfide) series filter materials products

Views : 5583
Update time : 2019-05-13 10:39:23
PPS (polyphenylene sulfide) series filter materials products:
Procon® is a registered trademark of PPS fiber of Japan Toyotta Textile Company in China.
Torcon® is a registered trademark of PPS fibers of Japan Toray Company in China
PPS needle-punched filter felt has a temperature resistance of 190-210 degrees Celsius. PPS needle-punched filter roll is the best filter material with acid resistance, alkali resistance and hydrolysis resistance, but its anti-oxidation ability is not good and it can not be used in the case of excessive oxygen content. PPS needle-punched filter felt is mainly used in waste incinerator, power plant boiler, industrial boiler and coal-fired industrial furnace.
Weight
(gsm)
Structure
(felt layer/scrim)
Thickness
(mm)
Air
permeability m3/m2·min
at 127MM H2O
Tensile strength N/5×20cm Tensile elongation % Temperature
Warp Weft Warp Weft Continuous Surge
500 PPS\PPS staple fiber 1.8 15 > 1000 > 1500 <20 <40 190 210
550 PPS superfinne\PPS 1.8 10-12 > 1000 > 1500 <20 <40 190 210
550 PPS+P84\PPS high strength and low elongation scrim 1.8 10 > 1200 > 1300 <20 <30 190 230